Release the two snap
latches on top of Sound Blimp.
Connect the internal
electrical cable to the receptacle on the camera for remote
camera into the case until it sits firmly (If necessary, adjust
camera so the viewfinder and lens are centered when Sound Blimp
cover and snap the latches shut.
Install the lens tube
completely over the lens. Rotate the lens tube clamps over the
ring on the tube. To take pictures, press the top switch
on the case. The
bottom switch controls the AF and viewfinder information.
Photographic Instruments, Inc.
11491 Chandler Blvd.
Hollywood, CA 91601