| Start
with camera and Sound Blimp.
Release the two
snap latches on top of Sound Blimp. Connect the internal electrical
cable to the receptacle on the camera for remote operation.
|
  |
 |
| Slide
the camera into the case until it sits firmly (If necessary, adjust
camera so the viewfinder and lens are centered when Sound Blimp is
closed). |
 |
 |
| Close
the cover and snap the latches shut.
Install the lens
tube completely over the lens. Rotate the lens tube clamps over the
ring on the tube. If you are using a zoom lens, rotating the lens tube
will operate the zoom function.
|
 |
 |
| To
take pictures, look through the viewfinder in the back and press the
switch on the case. |
|
|
|
|
