Release the two snap
latches on top of Sound Blimp. Connect the internal electrical
cable to the receptacle on the camera for remote operation.
Slide the
camera into the case until it sits firmly (If necessary, adjust
camera so the viewfinder and lens are centered when Sound Blimp
is closed).
Close the
cover and snap the latches shut.
Install the lens tube
completely over the lens. Rotate the lens tube clamps over the
ring on the tube. If you are using a zoom lens, rotating the
lens tube will operate the zoom function.
To take
pictures, look through the viewfinder in the back and press the
switch on the case.
Jacobson
Photographic Instruments, Inc.
11491 Chandler Blvd.
North
Hollywood, CA 91601
